Boilermaker Tools
Hand Tools
| Holding/Turning Tools |
adjustable (crescent) wrench |
adjustable pipe wrench |
| box-end wrench |
chain wrench |
combination wrench |
| hammer (slug) wrench |
hexkeys (Allen wrench) |
open-end wrench |
| screwdrivers |
socket wrench sets |
strap wrench |
| structural offset (SPUD wrench) |
torque wrench |
Holding Tools |
| bar clamp |
bench vice |
C-clamp |
| end-cut pliers (nippers) |
locking (vise-grip) wrench pliers |
Holding Tools (continued) |
| long-nose pliers |
pipe vise |
pony clamp |
| side-cutter pliers |
slip-joint pliers |
water-pump (utility) pliers/channel lock pliers |
| Struck or Hammered Tools |
ball peen hammer |
blacksmith's punch |
| bull pin |
claw hammer |
drift pin |
| metal-cutting chisel |
non-sparking hammer |
pin punch |
| sledges |
soft-face hammer |
Tools and Equipment for Fiberglass
| aluminum-serrated rollers |
barrel heater |
brooms |
| Cabosil for putty |
carborundum grinding discs |
(16-36 grit) |
| catalyst dispenser |
catalysts |
cleaning solvent (acetone) |
| fiberglass material cutting tools |
fiberglass materials (i.e., mat, roving, c veil) |
grinder c/w flexible disc back |
| heat lamps |
kilo scale |
masking tape |
| mohair rollers |
paint brushes |
plastic buckets (5 l. - 20 l.) |
| putty knife |
resin spray gun/hoses |
resins |
| roll of cardboard |
rubber gloves |
scale (30 kilo) |
| shovels |
styrene |
wooden mixing spatulas |
Environmental Tools and Equipment
| air movers |
atmospheric testing equipment |
explosion-proof lights |
| face shield |
fans |
fire-retardant coveralls |
| gloves/mitts (leather, rubber) |
hard hat |
hearing protection |
| heaters (barrel) |
leather apron cape, gauntlets |
mono goggles |
| personal atmospheric monitoring device |
personal protective equipment (PPE) |
respiratory protection (i.e., dust mask, half-face/ full-face cartridge respirator) |
| safety glasses |
self-contained breathing apparatus (scuba) |
steel-toed boots |
| supplied air respirators |
tarpaulins |
warning tags, signs, barricades |
Tube Preparation/Installation Tools
| cleaning solvent |
die grinder c/w variety of stones |
files |
| flappers wheels/emery cloth |
hand/power brushes (twist) |
lead hammer |
| peening tool |
serrating tool |
tube cut-off saw |
| tube guide |
tube hold reamer |
wallbanger |
Tube Removal/Expansion Tools and Equipment
| air carbon arc gouging equipment |
air motor c/w adapter sleeves |
beading tool |
| blind nipples |
collapsing tools |
expansion accessories (i.e., driving links, universals, gear drive) |
| expanders for boilers and heat exchangers c/w mandrels |
flaring/belling tools |
hydraulic stub puller |
| knockout tool |
splitting chisels |
torque controlled rolling motor |
| tube cutters (i.e., revolution tube cutter) |
tube drift |
tube end facer |
| tube plugs |
tube pulling spear |
tube wall reducing tool |
| water-soluble lubricant |
Rigging Equipment
| beam clamps |
beam trolleys |
blocks (i.e., tackle, wire rope, snatch) |
| fibre rope |
full body harnesses/lanyards |
hand chain hoists (chain falls) |
| hooks/latches |
jacks (i.e., hydraulic, screw, steamboat ratchet) |
lever-operated hand chain pulley (come-along) |
| links, swivels, rings, thimbles, eye bolts, etc |
overhaul (headache ball) |
plate clamps |
| rigging belt c/w tools |
shackles |
slings (i.e., wire rope, fibre material, chain, synthetic web, wire/chain mesh) |
| spreader and equalizer beams |
swivel hoist rings, load binders |
terminal end connections for wire rope (i.e., clips, sockets) |
| utility hoists (tuggers) |
wire rope |
wire rope puller |
Electric-Powered Tools and Equipment
| cut-off saw |
circular saw |
drills/presses |
| electric supply panel |
extension cords |
floodlights |
| grinders |
ground fault interrupter |
hacksaw |
| impact wrench |
jigsaw |
nibblers/shears |
| reciprocating saw |
screwdriver |
string/trouble light |
Pneumatic Tools and Equipment
| air compressor |
air grinders |
air hammers |
| air manifolds |
air scalers |
air supply hose |
| air utility hoist |
drills |
filters/oilers |
| hydrostatic test pump |
impact wrenches/sockets |
milling machine |
| regulator |
sand blasting equipment |
torque motor |
Marking Tools
| chalk |
dye |
felt pen |
| lumber crayon |
paint marker |
paint/brush |
| soapstone/holder |
steel letter/number set |
Cutting Tools and Equipment
| Hand Type |
bolt cutters |
files |
| hacksaw/replacement blades |
handsaw |
metal-cutting chisels |
| metal-cutting snips |
pipe/tube cutters |
rigging knife |
| scissors |
tap/die sets |
utility knife/replacement blades |
| Powered Type |
abrasive cut-off saw |
nibblers |
| power saw |
reciprocating saw |
tube milling machine |
| Alternative Open Flame Cutting Equipment |
MAP gas |
oxygen lance |
| propane |
Oxy-Fuel Cutting Equipment |
burning goggles (round/rectangular) |
| c/w coloured lenses |
flashback arrestors |
friction lighters (strikers) |
| manifold systems |
manual cutting torches |
oxy-fuel cart c/w fire extinguishers |
| oxy-fuel couplings and wrenches |
oxy-fuel cylinders |
oxy-fuel hoses and repair kits |
| radiograph and related equipment |
regulators, adapters, washers tip cleaners and drills |
tips (cutting and heating) |
| Plasma-Arc Cutting Equipment |
power source c/w cables/torch |
replacement ceramic cups and tips |
| Air Carbon-Arc Cutting Equipment |
air-arc gouger |
carbon-cutting electrodes (round/flat) |
| replacement insulators |
replacement electrode holder |
Welding Equipment (2)
| anti-spatter spray |
chipping hammer |
electrode holders (whips) |
| electrode ovens (stationary/portable) |
electrode pouch |
fire-retardant blankets |
| ground clamps |
hand wire brush |
inspection mirror |
| leather mitts and gloves |
leather protective clothing |
leather welding shield |
| lenses (filtered and clear) |
penlight and batteries |
pre-heating torch/equipment |
| power sources (welding machines) c/w ancillary equipment for welding processes such as ESW, FCAW, GMAW, GTAW and SAW |
purge paper |
remote amperage controls |
| stick electrodes |
stud welding equipment |
suitable respiratory protective gear |
| temperature ("temp") sticks |
welding shield c/w hard hat |
welding cable |
| welding cable "y" connectors |
welding distribution panel |
Layout Tools
| ball peen hammer |
chalk-line |
contour marker |
| dividers |
engineer's level |
laser level |
| piano wire |
plumb bob |
prick/centre punch |
| scribe |
spirit level |
squares |
| straight edge |
theodolite (transit) |
trammel points |
| water level |
wrap-around |
Measuring Tools
| callipers/dividers |
combination square |
compass |
| compound tube gauge |
drill point gauge |
folding rule |
| framing squares |
measuring tapes |
micrometers |
| protractor |
scale rule |
sliding T-bevel |
| steel tapes |
telescoping gauge |
vernier calliper |
Provided by the Interprovincial Standards Red Seal Program National Occupational Analysis (NOA)
http://www.red-seal.ca
